NEWS

  • Roller and Disc Screens for Precision Wood Chip Screening

    2026-11-12 Roller and Disc Screens for Precision Wood Chip Screening

    Wood chip screening is a critical first step in wood-based panel production. Roller and disc screens separate chips into controlled size and thickness fractions before refining, drying, resin blending, forming, and pressing. The result is a more uniform furnish, fewer contaminants and oversize parti...

  • Flaker Knife Materials Compared: Wear Resistance, Toughness, and Cost

    2026-11-12 Flaker Knife Materials Compared: Wear Resistance, Toughness, and Cost

    A flaker knife is a critical cutting component in a Ring Flaker used in particleboard production. It determines the quality of the wood flakes, which directly affects resin distribution and board strength. The flaker knife rotates at high speed, slicing wood chips into thin flakes. The cutting ed...

  • Copper Scraper for MDF Continuous Press: Selection Guide

    2026-11-12 Copper Scraper for MDF Continuous Press: Selection Guide

    Quick Answer Choose a copper scraper for an MDF continuous press by the press OEM's drawing, the steel-belt cleaning position and the approved alloy — not by the description "copper scraper." Confirm exact alloy, temper, hardness, dimensions, contact-edge geometry and holder f...

  • Deaeration Belt for MDF and Particleboard Production: Function, Structure and Selection

    2026-11-12 Deaeration Belt for MDF and Particleboard Production: Function, Structure and Selection

    Are you looking for a deaeration belt for an MDF or particleboard production line? Do you know how the belt affects air removal during pre-pressing ? In wood-based panel manufacturing, the mat formed from wood fibers or particles contains air within its loose structure. Before the material enters...

  • Continuous Press Chain Wear Diagnosis: A Technical Guide

    2026-11-12 Continuous Press Chain Wear Diagnosis: A Technical Guide

    Quick Answer Premature continuous press chain wear is primarily caused by inadequate lubrication at the pin/bushing interface, heat-related lubricant degradation and deposits, misalignment, excessive tension or loading, worn sprockets, abrasive contamination, or an incorrectly specified replaceme...

  • How to Choose a Wood Chipper for Panel Production Lines

    2026-11-12 How to Choose a Wood Chipper for Panel Production Lines

    A wood chipper sits at the head of the panel preparation chain, and every stage after it — screening, refining, drying, blending, forming, pressing, finishing — inherits its output. This guide sets out the selection logic in order: feedstock, capacity, machine type, chip specification, m...

  • Disc Chipper Knife Disc: Key Component for Efficient Wood Chipping

    2026-11-11 Disc Chipper Knife Disc: Key Component for Efficient Wood Chipping

    Looking for a replacement knife disc for your disc chipper? Do you know which dimensions and operating parameters need to be confirmed before ordering ? The knife disc is one of the most important components of a disc chipper. It carries the cutting knives and rotates at a designed speed to cut l...

  • Why Is Your Wood Chipper Producing Uneven or Oversized Wood Chips?

    2026-11-11 Why Is Your Wood Chipper Producing Uneven or Oversized Wood Chips?

    Quick Answer Uneven or oversized wood chips are caused by loss of clean shear between the rotating knives and the stationary anvil. The dominant causes are dull or damaged knives, incorrect knife-to-anvil clearance, inconsistent knife projection or cutting angle, and feedstock conditions outside ...

  • Steel Belt Cleaning Brush for Continuous Press Lines

    2026-11-11 Steel Belt Cleaning Brush for Continuous Press Lines

    A steel belt cleaning brush is an automated rotary brush system that removes chips, resin, fibers, dust and other residue from the moving steel belt of a continuous press. It protects panel surface quality, maintains belt tracking and reduces wear and unplanned downtime. Brush material, contact pres...