In forestry operations, wood processing plants, and biomass preparation projects, raw materials are not always concentrated in one place. Logs, branches, wood slabs, and processing residues may be stored or collected across different working areas.
A mobile drum wood chipper offers a flexible solution by combining wood chipping capability with a wheeled machine structure.
Instead of relying entirely on a fixed installation, the machine can be relocated to suitable working areas, helping operators organize raw material processing more efficiently.
A mobile drum wood chipper is an industrial wood chipping machine designed to reduce logs, branches, and wood residues into chips.
The machine consists of a feeding system, cutting rotor, chip discharge arrangement, drive system, and supporting structure. Its wheeled chassis allows it to be relocated between suitable operating locations.
It is suitable for applications involving:
Forestry and logging residues
Small-diameter logs and timber
Branches and twigs
Wood slabs and battens
Wood cores and waste veneer
Wood recycling and biomass preparation
Depending on the machine configuration, certain non-wood materials such as bamboo, reeds, flax waste, corn stalks, and cotton stalks may also be processed.
For stationary production requirements, see our conventional Drum Chipper Machine.
Traditional fixed chipping equipment is generally installed at a designated production location. Raw materials must be transported to the machine before processing.
For operations with scattered raw materials, this arrangement may require additional loading, handling, and internal transportation.
A mobile drum chipper provides another option.
Key advantages of a wheeled mobile design:
Flexible positioning: The machine can be moved to suitable working locations.
Reduced material handling: Processing closer to the raw material may reduce unnecessary internal transportation.
Adaptability to different sites: Useful for operations where raw material collection points change.
Convenient project organization: The equipment can be repositioned according to site layout and work schedules.
The machine's mobility is subject to its chassis, towing or transport arrangement, site access, and safety requirements. It should not be confused with a self-propelled machine unless that configuration is specifically supplied.
The basic working process can be divided into four stages:
Stage 1: Raw Material Feeding
Wood logs, branches, slabs, or other suitable materials are placed on the feeding conveyor.
Stage 2: Hydraulic Forced Feeding
The hydraulic feeding mechanism drives the feed rollers. The upper feed roller can move according to changes in material height, helping accommodate different raw material conditions.
Stage 3: Rotor Cutting
The rotating drum carries the chipper knives, which cut the incoming material into wood chips.
Stage 4: Chip Discharge
The processed chips are discharged for collection or transferred to the next processing stage.
A typical wood-based panel material preparation process may include:
Raw Material → Drum Chipping → Chip Screening → Further Processing
Depending on the production process, chips may be transferred to a Wood Chips Screen for size classification.
Rotor speed can be configured according to raw material characteristics and production requirements.
Adjusting the rotor speed may help match the cutting process to different chip size and capacity targets. The final configuration should be confirmed according to the machine design.
The hydraulic system drives the feeding mechanism and allows the upper feed roller to adjust its position.
This helps the machine accommodate variations in material height and improves feeding adaptability.
The system is particularly useful when processing irregular materials such as branches, slabs, and mixed wood residues.
The feeding conveyor adopts a 10 mm thick high-manganese-steel chain plate.
High-manganese steel is known for its ability to work-harden under impact and abrasion while retaining toughness in the underlying material.
Compared with conventional belt feeding, the chain conveyor provides a more positive conveying surface for suitable heavy and irregular raw materials.
The manufacturer's reference service-life figures are approximately 22,000 hours for the chain conveyor and 2,000 hours for a conventional belt conveyor. Actual service life depends on material characteristics, loading, operating conditions, and maintenance.
The hydraulic system allows the machine cover to be opened for inspection and maintenance.
This provides convenient access to components such as:
Chipper knives
Screen components
Internal wear parts
For replacement components, see our Chipper Machine Spare Parts range.
The hydraulic motor and control valves regulate feed roller operation.
The feeding roller speed can be adjusted according to the raw material and required operating conditions.
The system also supports forward and reverse feeding operations, subject to the machine's control configuration.
The machine can be operated through a fixed electrical control cabinet and a remote controller, according to the supplied configuration.
This provides operators with additional flexibility when controlling the equipment.
An overload protection device is incorporated into the electrical control system. When an overload condition is detected, the protection system can cut off the circuit to help protect the machine.
The cutting system has a direct influence on chip quality and machine performance.
Chipper knives are exposed to continuous cutting forces and wear. Their material, hardness, cutting edge geometry, and sharpening condition should be selected according to the raw material.
HUATAO supplies a range of related components:
Selecting suitable wear parts and maintaining the cutting system can help support stable chipping performance.
The machine can be used to process wood residues and other suitable raw materials into chips for further preparation.
Wood chips are an important raw material for pulp production. The required chip dimensions depend on the downstream process.
Branches, twigs, small-diameter logs, and logging residues can be processed closer to suitable collection areas.
Wood waste and selected biomass materials can be converted into chips for subsequent handling or processing.
Before selecting equipment, consider the following information:
| Selection factor | Information to confirm |
|---|---|
| Raw material | Logs, branches, slabs, veneer waste, or biomass |
| Material dimensions | Maximum length and diameter |
| Moisture | Typical raw material moisture |
| Required chip size | Target chip dimensions |
| Production capacity | Required output per hour |
| Feeding arrangement | Chain conveyor and hydraulic feeding requirements |
| Mobility | Working locations and relocation conditions |
| Downstream process | Screening, drying, storage, or biomass use |
These details help determine the appropriate machine configuration.
HUATAO supplies wood processing equipment and spare parts for MDF, HDF, particleboard, OSB, pulp and paper, biomass, and wood recycling applications.
Whether you need a mobile drum chipper or replacement cutting components, we can review your raw material, production requirements, and technical specifications.
Send us your raw material type, required capacity, target chip size, and working conditions to discuss a suitable configuration.
HUATAO Group – Wood Processing Equipment and Spare Parts Solutions.
can not be empty
can not be empty